AC•THOR
®
/ AC•THOR
®
9s Operating instructions, version a0020806
22
For controlling the space heating, the respective my-PV temperature sensor is to be installed
in a suitable place to provide a reliable reading!
TIP: When specifying room temperatures, to avoid using power from the public grid
the minimum values for day and night should be set correspondingly low. See
explanation "SH 1 temperatures".
Data my-PV
temperature sensors
Water temperature
Room temperature 2
Room temperature 1
(sun = daytime
operation)
Current power
output
Homescreen
Single-Boost
Starts a once-only hot water
boost backup
(button only appears if boost
backup is activated)
On the display a sun or moon symbol shows which time period is currently controlling the room
temperature. Different minimum temperatures can be specified for day and night.
Hot water 1 temperatures
The maximum temperature permitted to be reached at my-PV temperature sensor 1 can be adjusted
(factory setting 60 °C). This has nothing to do with a bimetal thermostat which may be installed!
If the cut out temperature of an immersion heating element with a bimetal thermostat is set
too low, the AC•THOR may possibly be unable to reach the desired temperature!
If the optional automatic temperature boost backup is shown "On" in the window on the right
(factory setting "Off"), a minimum temperature can then be set (factory setting 50 °C).
Automatic temperature boost backup "On":
The AC•THOR can ensure a minimum temperature at the my
-PV temperature sensor through the
immersion heating element connected. This is supplied with maximum power.
Hot water 1 min switching times
This setting can be selected when the temperature boost backup is "On" under Hot water 1
temperatures".
There are two time windows available to maintain the minimum temperature on the my-PV
temperature sensor. Start and finish can each be defined at full hours. Factory settings suggest
switching times of 5 to 11 pm and 5 to 7 am.
TIP: Restrict the times when the minimum temperature has to be maintained to
mornings and evenings, to increase your own PV consumption through the day!
