Instruction Manual
Digital Wireless System (Transmitter & Receiver)
DXS200
◈
DXS200 Digital Wireless System
◈
Installation
◈
Features
◈
Technical Specifications
* Design And Specifications Are Subject To Change Without Notice.
OSD function
How to do “Pairing”
TX (1)
Manual (1)
RX (1)
Screw kit (1)
Connection Wiring
◈
Contents
Antenna (2)
Cable for RX, 630cm (1)
Cable for TX, 380cm (1)
Button & LED Indicators RX & TX
Power LED (Red)
Pairing Button
(When connecting receiver to the monitor)
1. Connect the receiver to the monitor and connect the transmitter to the camera.
2. Press both buttons on TX unit and RX unit for over 3 seconds at the same time.
3.
Red color LED indicator will start blinking.
When the pairing is finished, red color LED indicator turns on permanently.
4. When the power ON, green color LED indicator turns on.
(When saving Pairing data)
(When pressing button on TX and RX)
(When Pairing is successfully done)
Pairing LED (Green)
GND
10-32Volt DC (+15)
GND
10-32Volt DC (+15)
MONITOR
CAMERA
A
B
NC
AUDIO
NC
VIDEO GND
VIDEO
A. 4-pin male
NC
VIDEO
AUDIO
10~32Volt DC
VIDEO GND
B. IP 4-pin female
Antenna
Wireless Digital Transmission of Video and Audio
Wireless Range Max. 120 meter (at the open space)
Secured wireless link
Free Input Voltage (DC 10V ~ 32V)
Re-pairing function to enable interchanging trailers and trucks each other
Adaptive Frequency Hopping (smart modulation)
Display signal strength indicator (at the monitor)
Status LEDs (power & pairing)
IP69K waterproof (transmitter & receiver)
Anodized aluminum housing (corrosion-proof)
Operating frequency
2370MHZ ~ 2510MHZ Digital Wireless Rx/Tx
Modulation system
Adaptive Frequency Hopping
Wireless range
Max. 120 meter (at the open space)
Latency
Under 150 msec communication (at the open space)
TV system
PAL
Image Encoding
MPEG4
Video Input/Output
CVBS 1.0VP-P, 75
Ω
Audio Input/Output
AUDIO Max. 2VP-P, 50
Ω
High Resolution
720 x 576 (PAL)
Power supply
DC 10 ~ 32V
Power consumption
2.4 Watt Max.
Current consumption
200 mA Max. (at 12V DC)
Operating temperature
-30
C ~ 70
C
IP Rating
IP69K
Dimensions
Transmitter (TX): 100mm x 93mm x 25mm
Receiver (RX): 100mm x 93mm x 25mm
Weight
Transmitter (TX): approx. 0,75 Kgs incl. cables
Receiver (RX): approx. 0,75 Kgs incl. cables
Warning!!
10-32V volt DC IN = 10-32 Volt DC OUT to the camera.
Make sure to select a compatible camera accordingly.
(12 Volt cameras will be damaged by 24V DC)
