E N C O M P A S S X D – Q U I C K S T A R T G U I D E
( L A R G E D I S P L A Y )
The ENCOMPASS XD
™
is a digital audio playback device that plays audio content directly from a CD-ROM or DVD-ROM.
The system is designed to be virtually “plug and play”. Note that only discs formatted for the ENCOMPASS XD will play.
Consumer audio CDs, CDi and other non-Encompass formatted media will not play in the ENCOMPASS XD.
Your box should include: 1.) ENCOMPASS XD
2.) Power Module 3.) This one-page installation guide
The ENCOMPASS XD includes a back-lit front-panel LCD and five front-panel buttons: POWER,
S
(UP),
T
(DOWN), BACK
and ENTER. Should assistance with installation or use of the front panel interface be required, please contact Muzak Network
Operations at 800 327.6549.
ENCOMPASS XD Connections & Settings – Reference diagram on reverse
1 Power
Using the enclosed power module (only), connect the appropriate end to the ENCOMPASS XD rear panel
port labeled 12 VDC IN. Connect the other end into an appropriate 105-130 VAC, 60 Hz, three-prong
power outlet.
2 Audio
Output
Using a standard RCA-type audio cable, connect one end to the appropriate ENCOMPASS XD rear panel
RCA-type connector. Connect the other end to an audio amplifier. The Encompass XD supports two
audio zones. The primary zone utilizes the A outputs (numbered 1 and 3). The secondary zone utilizes
the B outputs (number 2 and
4).
3
Time & Date
Press the ENTER button on the faceplate to access the control/diagnostic menu. Press the
▼
button once,
then press ENTER to access the Date menu. Press the
▲
or
▼
button to modify the month. When correct,
press ENTER to move to the next field. The BACK button may be pressed to return to the previous field.
Next, use the
▲
&
▼
arrows to modify the time zone. Press ENTER to store the time zone. Finally, use the
▲
&
▼
arrows to confirm the Daylight Saving Time settings. In most cases, this will be YES. If you are in
an area which does not participate in Daylight Saving Time, select NO.
What to Expect
Upon pressing the POWER button, the LCD on the faceplate of the ENCOMPASS XD will illuminate green
and display the Muzak logo with the message Now initializing drive, then the message Now looking for
media. The latter will transition to Please Insert Media. Press the eject button to open the disc tray. Place the
disc on the tray, with the label facing upward. Press the eject button to close the disc tray. After
approximately eight seconds, the unit will begin playing audio. At that time LCD will display the artist name
and song title.