4x2 HDMI 2.0 Quad-View Processor
Installation Guide
© Muxlab Inc. 2020
8
7. Operate and Connect
Software Control through RS-232 / Ethernet port
1.
System Requirement
(1)
OS information: MS Win XP/7/8/10
(2)
Baud rates: 115200
(3)
Free space taken on hard disk (software size): 10 MB
(4)
Minimum RAM requirement: 256MB
2.
Control interface
When clicking on the executable file, the following dialog will pop-up (under Microsoft Windows 7, please run
as administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port and click
the OK button.
Ethernet Mode: Enter the IP address of the device and click the OK button.
After the software control method setting is selected, the system control interface will automatically start up.
