© MuxLab Inc. 94-000921-A SE-000921-A
2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
Specifications
Specifications
Environment
HDMI 2.0, resolution of up to 4K/60 (4:4:4)
Devices
Blu-Ray, Set Top Boxes, Media Players/Streamers, projectors, monitors, TVs, PCs,
supporting HDMI.
Signal Protocol/Standard
HDMI 2.0 and HDCP 2.2
Video Bandwidth
594MHz
Network Bitrate (BW)
32Kbps to 60Mbps for H.264/H.265, and 32Kbps to 200Mbps for MJPG
Latency
200ms (in low latency mode with H.265)
Protocols
Supports Multicast, RTSP, RTMP (H.264), HLS, FLV (H.264), and TS
Connectors
Two (2) HDMI connectors for AV input and AV Loop-out.
One (1) RJ45S for Ethernet connection.
Two (2) 3.5mm connectors for 2CH audio embedding and loop-out.
One (1) 3.5mm connector for directional IR (direction controllable via software).
One (1) RS232 3-Pin Phoenix connector for controlling end devices.
One (1) 2.1mm locking power connector.
Maximum Distance
Cat5e/6: 330ft (100m) from Ethernet Switch. Unlimited over the Internet
Note: When installed in an electrically noisy environment, an STP cable must be used.
Also, cross-connection reduces the effective distance depending on the grade of twisted
cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Power Source
This device supports PoE (PD), an external power supply is not included. It is intended to
be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply
(500993) may be purchased separately.
PoE
IEEE 802.3af
Power Consumption
7.8W
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Unit Dimensions
6.1
” x 4.4” x 1.0” (154mm x 111mm x 25mm)
Shipping Weight
1.1lbs (0.5kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
3 years
Order Information
500764-TX HDMI over IP H.264/H.265 PoE Transmitter, 4K/60
Accessories
(These items are sold
separately)
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500990 IR Emitter
500994 IR Sensor
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
HDMI over IP H.264/H.265 PoE Transmitter, 4K/60
500764-TX
Quick Installation Guide
Overview
The HDMI over IP H.264/H.265 PoE Transmitter, 4K/60 allows HDMI source equipment to be
extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable and is
compatible with the Muxlab 500762-RX Receiver to support point-to-point, point-to-multipoint
and multipoint-to-multipoint configurations, Video Wall and Multiview capabilities in a low
bandwidth expandable and cost effective manner, without the need to install dedicated cabling
systems. The exceptionally low bandwidth requirements of this device in the H.264/H.265 video
codec setting allows for streaming audio/video content over a local network, and over the Internet
for distributed installations spread throughout the globe. The unit also supports a MotionJPG
(MJPG) video codec setting for low latency applications. The transmitter accepts a 4K video @
60Hz and streams the content to an H.264/H.265 Receiver, such as the MuxLab 500762-RX, to be
displayed on a 4K monitor. The Transmitter may also send H.264/H.265 video streams to other
H.264/H.265 compatible Receiving devices. The device supports HDMI and 2CH Audio loop-out
ports, and PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
The Transmitter (500764-TX) and Receiver (500762-RX) are sold separately. IR Emitter and IR
Sensor, if required, may be purchased separately for IR based remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configurations the Ethernet Switch must
have Gigabit ports, DHCP Server capability and additionally support the IGMP communication
protocol for the multipoint-to-multipoint case. MuxLab recommends using the Cisco SG350 Series
Managed Switches.
The MuxLab ProDigital Network Controller (500811 or 500812) and MuxControl iOS and
Android App is available to simplify the configuration and utilization of the 500764-TX and other
MuxLab Av over IP products.
Applications
Applications include Audio/Video streaming over LAN/Internet, commercial and residential AV
systems, classroom projector systems, digital signage, boardroom systems, and medical
information systems.
Installation
Note: The following instructions are for the 500764-TX Transmitter and a compatible
Receiver such as the MuxLab 500762-RX Receiver.
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product labels, see the