MuxLab 100508 Page 4 Operation Manual Download

Page: 4 / 18

HDMI 4x4 Matrix Switch, 4K/60

Installation Guide

2. Features

⚫

HDMI V2.0 supports: 4K x 2K @60Hz, 1080P @120Hz, and 1080P 3D @60Hz.

⚫

Deep Color support 36/30/24-bit.

⚫

HDR 4:2:2 12 Bit

⚫

Supports LPCM 7.1CH, Dolby True HD, Dolby Digital Plus, DTS-HD Master, Dolby Atmos and DTS:X Audio
transmission.

⚫

Allows any source to be displayed on multiple displays at the same time.

⚫

Allows any HDMI display to view any HDMI source at any time.

⚫

Supports RS-232 control, TCP/IP Control, IR Remote Control, and On-Panel Control.

⚫

HDMI connectors with Locking nuts

3. Package Contents

⚫

One (1) HDMI 4x4 Matrix Switch, 4K/60

⚫

One (1) 12V/2A DC power adapter

⚫

Three (3) Blades: US, UK and Euro

⚫

One (1) Quick Reference Sheet

⚫

One (1) HDMI Matrix IR Remote

⚫

One (1) RS232 Terminal Block

Notes

：

Confirm that the product and

accessories are all included. If not, please contact the supplier from which

you purchased the unit.

Summary of Contents for 100508



















Search results

Summary of Contents for 100508

Reviews:

Related manuals for 100508

Brands by name

Popular brands

MuxLab 100508, Operation Manual

Search results

Summary of Contents for 100508

Reviews:

Related manuals for 100508

Brands by name

Popular brands