manualshive.com logo in svg

MUTOH XPJ-661UF, Operation Manual, Page: 94 / 174

Share
Download
MUTOH XPJ-661UF Operation Manual Download Page 94

94     Maintenance6: Calibration

Maintenance6: Calibration

Calibrate table height position information to optimize the gap between the print head 

and media.

 

"Calibrating table height" P. 54

Maintenance7: Moving Printer

Before packing printer for moving or transporting, use this menu to automatically move 

the table to the position to secure the table with shipping brackets.

 

"Changing Table Position for Packing" P. 150

Maintenance8: Table Maintenance

Use this menu to automatically move the table to the position to perform the table 

maintenance.

 

"Table Maintenance" P. 132

Maintenance 9: Daily Maintenance

Use this menu in following cases:

• If the nozzle missing still persists after performing head cleaning.

• If you perform printing all day without entering to sleep mode and you need 

to perform daily maintenance.

 

"Clean daily maintenance parts" P. 127

Submenus

Tap [Enter] to start maintenance.

After the maintenance is complete, tap 
[Enter].

• The printer automatically performs the 

Short cleaning.

Important!

To perform daily maintenance after using the printer for the day, see 

"Daily Maintenance" P. 116

.

Maintenance6

Calibration

Maintenance7

Moving Printer

Maintenance8

Table Maintenance

Maintenance9

Daily Maintenance

Daily Maintenance

Start 

 

ー＞Enter

Daily Maintenance

End 

 

ー＞Enter

Summary of Contents for XPJ-661UF















































































































































































Reviews:

No comments