MUTOH XPJ-661UF, Operation Manual, Page: 139 / 174

Replacing the cleaning wiper 139
The cleaning wiper is an essential part to make printing consistent. Please replace it periodically.
Replacing period:
• Approx. every six months
Replacing the cleaning wiper
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
When using this product, wear personal protective equipment (supplied gloves or solvent-resistant
gloves, goggles or protective eyewear, protective mask, protective clothing) to avoid skin contact
with ink.
Do not open or close the cover while you are off balance.
You may pinch your finger or get injured.
Replacing steps
[1] Check that the media and jig are removed from the printer.
[2] Tap [Home].
[3]
• Use to choose the menu shown left.
• Tap .
[4]
• Use to choose the menu shown left.
• Tap .
[5] Tap [Enter].
• The carriage will move to the left side of the printer.
• The cleaning wiper will move upward.
The message on the left will appear.
CAUTION
Menu3
Maintenance
Maintenance3
CR Maintenance
CR Maintenance
Start ー＞ Enter
CR Maintenance
End ー＞ Enter