MUTOH XPJ-661UF, Operation Manual, Page: 119 / 174

Performing Daily Maintenance 119
Performing Daily Maintenance
1.
Cleaning of UV Lamp
After printing, the UV-LED lamp may get hot.
Leave it for 30 minutes to cool down and then start maintenance.
[1] Open the front cover gently, and then place the tray on the table.
Important!
Do not place any object inside the printer.
[2] Look in the stainless tray to check for ink or dust on the UV-LED lamp.
If no ink or dust is found on the UV lamp, skip this step and move on to
"Moistening the surface of print head nozzles"
P. 121
.
[3]
Use a paper towel to clean dust or ink off the underside of the UV-LED lamp.
CAUTION