Set 7: Origin 81
Note
Depending on the set value of the side margin, the maximum set value of Y (print head transferring distance) decreases.
The right side margin will be the following sum depending on the setting.
Y of Origin menu + 8mm (when the spitting is set to On Media) + Value set in Side Margin menu.
Set 7: Origin
Sets the beginning of printing (origin) of the print data.
Set the menu when reprinting on the margin with changing the printing data position to
the printed media.
Use the [+] / [ - ] key to enter the value, and press the [Enter] key.
Setting values
X (media feeding distance):
0 mm to 15,000 mm
Y (print head transferring distance)
0 mm to 1,690 mm
Set 8: Head Travel
Sets up the range that Print head moves while printing.
Setting values
Print head moves the range of the print data
width.
Print head moves from origin to the maximum
printable media width.
Print head shifts within the media width.
This is the initially set value.
Set 7:
Origin
X (PF) :
0 mm
X (PF) :
15000 mm
・
・
・
Y (CR) :
0 mm
Y (CR) :
1690 mm
・
・
・
Set 8:
Head Travel
Distance :
Data
Distance :
Machine
Distance :
Media
