76 Set 1: User Type
PF4: Micro Print
• Observe the pattern and verify the micro change value.
• In the pattern, look for a place that has least white lines or overlapping in images. The number printed below the pattern
is the micro change value.
• Enter the Micro change value for "PF5: Micro Change".
PF5: Micro Change
Pressing the [Enter] key when the words on the left are displayed will execute micro
adjustment printing.
Note
The micro change value saved becomes the pattern’s standard value. For example, if “-0.20” is saved as the micro change value and a pattern is printed again,
the number below the center pattern changes from “0.00” to “-0.20”, and the left edge to “+0.30” and right edge to “-0.70”.
Use the [+] / [ - ] key to enter the adjustment value, and press the [Enter] key.
Select whether you wish to perform confirmation print and complete the setup.
Setting values
-5.00% to <0.00%> to 5.00%
<> indicates the initial value.
PF4 :
Micro Print
-0.50
-0.20
-0.10
0.00
+0.10
+0.20
+0.50
+0.80
+1.20
-0.80
-1.20
Micro Change Value
-0.50
-0.10
-0.20
Not Adequate
Not Adequate
Adequate
PF5 :
Micro Change
Micro :
0.00%
