Head cleaning 109
3
Cleaning each part
To use this product always in its best condition, please clean periodically.
When nozzle clogging is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please use them accordingly based on your usage condition.
Head cleaning
Short cleaning
Consumes less ink than Normal cleaning.
Normal cleaning
Conduct nozzle check before and after printing, and use when nozzle clogging is found.
Long cleaning
Consumes more ink than Normal cleaning. When nozzle clogging still occurs after Normal
cleaning, conduct Long cleaning.
Little Charge
Though much better cleaning results can be expected than Long cleaning, it consumes a
large amount of ink.
*This mode cannot be selected via the “Cleaning” key. Select it from the Cleaning submenu
in the Panel Setting Menus.
Steps for head cleaning
[1]
Use the [Cleaning] key to select a cleaning mode.
• The “Cleaning Mode” indicators will change each time the key is
pressed.
Note
• You can alternatively do this via the printer driver or the VSM’s
remote panel.
• The “Cleaning Mode” indicators will change as shown below.
Cleaning each part
Press!
Short Cleaning
Normal Cleaning
Long Cleaning