MUTOH VJ-1638WX, Operation Manual

Page: 274 / 380

Panel setup menu VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL
274 Setup menu
5.1.26 Header Dump menu
This function is to specify whether to print the following information (dump data) of print data.
• Data Header
• Number of Dot in Data (Printed only when the header dump setting is “On”.)
• Printer Serial Number
• Firmware Version
NOTE
The dump data will be used as a reference material to receive technical supports.
TIP
When a print is executed in connection with computer, the setting of RIP software will be printed
in the “Data Header”.
Setup item Setting Description
Header Dump <Off>
• Only a print data will be printed.
• Damp data will not be printed.
On After printing of print data, the dump data will be printed.
Dump
• Only a dump data will be printed, but the “Number of Dot
in Data” will not be printed.
• Print data will not be printed.
—
• [Cancel] key: Save the set value, and return to the previous
menu.
5.1 Setup menu