MUTOH VJ-1304 Quick Reference Download Page 37

Page: 37 / 114

VJ-1304 QUICK REFERENCE

3 Basic usage

3-11

3 Basic

usage

5. After the Head washing is complete, take out the ink cartridge from the bag and shake it gently two

to three times.

•

Slots for ink cartridges are specified depending on the colors of the ink cartridge.
Match the mark on each slot with the color of the ink cartridge.

•

Keep the mark of the ink cartridge facing up and insert it into the slot of the printer.

•

Insert the ink cartridge all the way to the end of the slot.

•

"Ink Refill **%" is displayed on the operation panel and ink replenishment starts.

•

Ink replenishment takes about 4 minutes.
Ink filling operation and pause operation are repeated during the ink replenishment.

•

When "100%" is displayed, the ink replenishment is complete.

NOTE

• Do not perform the following operations during ink filling.

• Do not turn the printer OFF.

• Do not unplug the power cable.

• Do not open the front cover.

• Do not push the media loading lever backward.

•

After the ink replenishment is complete, "Media End" is displayed on the operation panel.

No.

Name

Ink cartridge

Ink cartridge slot K

Ink cartridge slot C

Ink cartridge slot M

Ink cartridge slot Y

Summary of Contents for VJ-1304



















































































































Search results

Summary of Contents for VJ-1304

Reviews:

Related manuals for VJ-1304

Brands by name

Popular brands

MUTOH VJ-1304, Quick Reference

Search results

Summary of Contents for VJ-1304

Reviews:

Related manuals for VJ-1304

Brands by name

Popular brands