MUTOH ValueJet VJ1324X Page 178 Operation Manual Download

Page: 178 / 264

Panel setup menu

VJ-1324X OPERATION MANUAL

178

5.1 Setup menu

5.1.25 Header Dump menu

This function is to specify whether to print the following information (dump data) of print data.

•

Data header

•

Data dot number (printed only when Header damp setting is “On”)

•

Printing date and time

•

Printer serial number

•

Firmware version

•

Receiving time (printed only when Header damp setting is “Dump”)

•

Receiving size (printed only when Header damp setting is “Dump”)

NOTE

• The dump data will be used as a reference material to receive technical supports.

TIP

When a print is executed in connection with computer, the setting of RIP software will be printed in the “Data Header”.

Setup Item

Set Value

Description

Header Dump

<Off>

• Only a print data will be printed.

• Damp data will not be printed.

After printing of print data, the dump data will be printed.

Dump

• Only a dump data will be printed, but the “Number of Dot

in Data” will not be printed.

• Print data will not be printed.

Prints the last header dump.
If no history is available, “No Print Data” will appear on the
operation panel.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands