MUTOH ValueJet VJ1324X Page 177 Operation Manual Download

Page: 177 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

5.1 Setup menu

177

5.1.23 Subnet Mask menu

Sets the subnet mask of the printer.

NOTE

• Be sure to set the subnet mask after consulting the network administrator.

5.1.24 Gateway menu

Sets the gateway.

NOTE

• Be sure to set the gateway after consulting the network administrator.

Setup item

Setting

Description

Subnet Mask

000.000.000.000 to
<255.255.255.000> to
255.255.255.255

Change the subnet mask by operating the following keys.

• [+] key: increases the setting value.

• [–] key: decreases the setting value.

• [Enter] key: changes the setting for the next segment. In the

4th segment, it saves the setting and shifts to the previous
menu.

—

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Setup item

Setting

Description

Gateway

000.000.000.000 to
<192.168.001.254> to
255.255.255.255

Change the gateway by operating the following keys.

• [+] key: increases the setting value.

• [–] key: decreases the setting value.

• [Enter] key: changes the setting for the next segment. In the

4th segment, it saves the setting and shifts to the previous
menu.

—

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands