manualshive.com logo in svg

MUTOH ValueJet VJ-628X, Operation Manual

Share
Download
MUTOH ValueJet VJ-628X Operation Manual Download Page 68

68     Replacing the plug for the high-capacity ink pack adapter

Once you have removed and inserted the high-capacity ink pack adapter for a certain times, the plug needs to be replaced.

The more the high-capacity ink pack adapter is removed and inserted, the shorter the plug life becomes.
Follow the procedure below to regularly check the plug life.

Replacing the plug for the high-capacity ink pack adapter

  1.  

 How to check the plug life

[1]

 Launch the MSM remote panel.

"Displaying remote panel" on page 11

[2]

Click the [Plug Lifetime] tab.

• The life is indicated by the number of the green stars.5 stars are displayed at the beginning.

• As the plug life is running out, the number of star decreases one by one (20%).

• When a yellow star is displayed, it means that the plug needs to be replaced soon. Have a replacement plug ready.

• When a red star is displayed, it means that the plug needs to be replaced now.

Note

The replacement plug is supplied with the high-capacity ink pack adapter.

Summary of Contents for ValueJet VJ-628X



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands