MUTOH ValueJet VJ-628X Operation Manual Download

Page: 16 / 90

16 Turning the power ON

Powering ON/OFF

Turning the power ON

[1]

Close the front cover.

[2]

Press the power button of this product to turn the power ON.

• The blue light turns on.

• This product starts its initialization operations.

Turning the power OFF

[1]

Make sure printing is done.

[2]

Press the power button of this product to turn the power OFF.

• The blue light becomes OFF.

• This product will start turning off.

[3]

Turn the media fixing knob to release the lock.

Note

When not using this product, release the lock of the media fixing knob

regardless of power being OFF.

Important!

When using metallic ink and white ink for VJ-628X, make sure that the power is always turned on. When you are not using the

printer, always leave the power on and put the printer into the sleep mode.

If you do not put the printer into the sleep mode, the ink inside the printer could settle out and/or coagulate, causing poor image

quality or printer failure.

Powering ON/OFF

Press!

Summary of Contents for ValueJet VJ-628X



























































































Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands

MUTOH ValueJet VJ-628X, Operation Manual

Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands