Set 9: Nozzle Select 75
Note
• You cannot select this menu when using 6-color for printing.
• You can also use this in combination with the “Single Head” menu.
When the “Roll Kind” is set to “Roll 1”, “Roll 2” or “Roll 3”
Set 9: Nozzle Select
You can set whether to reduce the print head nozzles to half for printing.
Print speed will be decreased, but the image quality will be improved.
•
This menu will only appear in 4-color configuration.
Setting values
Nozzle Select is not used.
This is the initially set value.
Prints using half of the print head nozzles.
Prints with one nozzle line of the 2 nozzle lines
per color.
Uses the nozzle line opposite of “Nozzle A”.
Set 10: Roll Length
Sets up the roll media length.
Setting values
Roll Length is not used.
This is the initially set value.
Sets up the roll media length.
The set values of the roll media length can be
set as “Roll1” to “Roll3”.
Length menu
Sets up the roll media length.
Setting values
1 m to <30 m> to 200 m
<> indicates the initial value.
Set 9:
Nozzle Select
Nozzle Select :
ALL
Nozzle Select :
Nzl. A
Nozzle Select :
Nzl. B
Set 10:
Roll Length
Roll Kind :
Off
Roll Kind :
Roll 1
Roll Kind :
Roll 2
Roll Kind :
Roll 3
Roll Kind :
Roll 1
Enter
Length
:
30
m
