20 Printing area
Printing is always started from Origin position (print start point).
See the figure below as example.
Printing area
a
c
b
d
Printable Area
Media f
eeding dir
ec
tion
a=5 mm *
1
b=5 mm to 25 mm
c=5 mm
d=5 mm to 25 mm
*
1
The value of “a” will be 15 mm in the following cases:
• Immediately after media initialization
• When feeding the media by using the [Backward] key
The value of “a” will be 40 mm in the following cases:
• When Media Initial menu is set to “Top&Width”
• After cutting the media
