MUTOH ValueJet VJ-1628X, Operation Manual

Page: 226 / 358

Panel setup menu VJ-1628X OPERATION MANUAL
226 5.1 Setup menu
5.1.6.2 Page Gap menu
If you set the media ejection mode to "Take-up", the menu shifts to the Margin between Pages menuPage
Gap menu.
In the Margin between PagesPage Gap menu, you can change the margins between the print results.
5.1.7 Method of Cut menu
Sets the media cutting operation after printing.
NOTE
• When the media detection is set to “Off”, the media cannot be cut automatically.
• Some media may not be cut (cannot be cut at all or cannot be cut finely). In such a case, set the
“Output Mode menu” to “Off” and cut the media manually.
5.1.6 Output Mode menu
4.4.4 Cutting media manually
Setup item Setting Description
Page Gap <Normal> Does not change the margin between print results.
Narrow The margin between print results becomes narrower than
when it is set to "Normal".
—
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Dry Time menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.6 Output Mode menu