MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 227

Page: 227 / 439

3.8.6 Replacing Wiper Origin Sensor Cable Assy

P.3-145

3.8 Replacing Maintenance Section

VJ1324E-M-02

3.8.6

Replacing Wiper Origin Sensor Cable Assy

NOTE

Wiper Origin Sensor Cable Assy is a stranded of White

、

Black

、

gray.

Remove I/H Cover.

"3.2.1 Removing I/H Cover" p.3-7

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

Remove Wiper Origin Sensor Cable Assy from Wiper origin Sensor.

Remove Wiper Origin Sensor Cable Assy from clamps (4 pieces) on the path.

Remove connector (white) of Wiper Origin Sensor Cable Assy from JUNCTION Board Assy

（

J13

）

Replace Wiper Origin Sensor Cable Assy.

To reassemble unit, reverse the removal procedure.

No.

Name

Connector of Wiper Origin Sensor Cable Assy

Wiper origin Sensor

Wiper Origin Sensor Cable Assy

$CEMUKFGQH/CKPVGPCPEG5GEVKQP

No.

Name

Connector of Wiper Origin Sensor Cable Assy

JUNCTION Board Assy

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 227 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: