MUTOH Kona 1400, User Manual

Page: 64 / 218

User’s Guide Kona / Kona apparel cutting plotter
Basics
64 AP-75370 - Revision 1.1
3.7.5 Loading a roll of pre-printed media using the roll-off system
Configuration to start from

The pressure rollers are raised.

The roll-off system is installed correctly:
1.
Install deflection roll bracket.
2.
Install the deflection roll.
3.
Install the media holders.

The rear media collection bag is open and empty.

The front media collection bag is open (when the cutting job is smaller than 4m).

The front media collection bag closed (when the cutting job is larger than 4m).
Note

The media roll-off system provides extra protection of your files. When only
working with the media support rollers, the media is in constant contact with
these rollers which could damage sensitive media files.

Be aware that the media roll-off system is not standard on a Kona / Kona
apparel 760, 1400 and 1650. This procedure is only possible when you have
this option installed.