MUTOH Kona 1400, User Manual

Page: 120 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
120 AP-75370 - Revision 1.1
4.2.4 Actions 1/2
Jogging
Used to move the head or media forward and backward. This does not change the origin.
Step 1:
Press the following buttons in order:

Actions

Jogging
Step 2:
The cutter displays following screen:
Step 3:
Navigate the head over the media using the arrows. The single arrows let the head
move slowly and more accurate. The double arrows will move the head faster.
Item Information
Move the head to the left
Move the head to the right
Feed the media forwards
Feed the media backwards
Position of the knife top.

The X coordinate is the difference between the front edge of the
media and the front sensor.

The Y coordinate is measured from the right side of the cutter.
Pressing
Cancel
after moving the head or the media results in the head
and media returning to its previous position.
Pressing
OK
after moving the head or the media results in a confirmation
of the position.
Note

It is possible to move both the head as media at the same time when touching
the jog screen in diagonal direction.