11
PROTECTION CIRCUIT
The PROTECT LED
[ 15 ]
lights up red, when the amplifier is overheated, or a short circuit occurs respective
a too low impedance load is connected to the speaker outputs. If this events, the internal built-in protection
circuit shuts down the amplifier automatically. The amplifier should work again properly after you have solved
the problems.
The POWER LED
[ 16 ]
lights up green, if the amplifier is in operation.
16
15
10
11
12
13
VARIABLE BASS BOOST
By using the BASS BOOST controller
[ 10 ]
you are able to increase the bass enhancement from 0 to 12 dB.
ATTENTION:
Use the BASS BOOST wisely!
VARIABLE LOW PASS FILTER
Set the desired crossover frequency by using the controller LOW PASS
[ 12 ]
. Thus to that only the frequencies
below the chosen crossover frequency will be amplified and the subwoofer plays more precisely and efficient.
PHASE SWITCH
The PHASE switch
[ 11 ]
allows to switch the phase from 0° to 180° to match the output signal with the vehicle’s
interior acoustic.
BASS LEVEL REMOTE CONTROLLER
With the included bass level cable remote controller
[ 13 ]
allows to adjust the bass level e.g. out of the driver’s
seat. Connect the remote controller and the REMOTE CONTROL terminal
[ 14 ]
with the enclosed cable.
BASS LEVEL
POWER
MIN
MAX
14
POWERED SUBWOOFER SYSTEM
SUB1
POWERED SUBWOOFER SYSTEM
SUB1
POWERED SUBWOOFER SYSTEM
SUB1
POWERED SUBWOOFER SYSTEM
SUB1
POWERED SUBWOOFER SYSTEM
SUB1
