manualshive.com logo in svg

Musicmakers CIGAR-BOX UKULELE KIT, Quick Start Manual

Share
Download
Musicmakers CIGAR-BOX UKULELE KIT Quick Start Manual Download Page 1

CIGAR-BOX UKULELE KIT

MUSICMAKERS

PO Box 2117

Stillwater, MN 55082

6 5 1 - 4 3 9 - 9 1 2 0

w w w . h a r p k i t . c o m

PARTS LIST:

Cigar Box

Pre-cut String Board

Set of 4 Strings

4 Geared Tuners

16 Tiny screws for gears

Plastic Nut

Plastic Bridge

20 Flat Toothpicks

Flatpick

2 Wood Screws, 3/4”

2 Cup Washers

Assembly Instructions

TOOLS & SUPPLIES

YOU WILL NEED:

Elmer’s Wood Glue

Damp Rag

Pencil

Sanding Block (100 grit)

Wire Cutter

Screwdriver

Drill

Summary of Contents for CIGAR-BOX UKULELE KIT

Page 1: ...ar Box Pre cut String Board Set of 4 Strings 4 Geared Tuners 16 Tiny screws for gears Plastic Nut Plastic Bridge 20 Flat Toothpicks Flatpick 2 Wood Screws 3 4 2 Cup Washers Assembly Instructions TOOLS SUPPLIES YOU WILL NEED Elmer s Wood Glue Damp Rag Pencil Sanding Block 100 grit Wire Cutter Screwdriver Drill ...

Page 2: ...le Fret Chart cut paper pattern Tape both ends to keep pattern from moving Mark wood carefully on both sides of pattern P A T T E R N S H E E T nut bridge 3 Use small amounts of Elmer s Wood Glue to fasten the toothpick frets on the top surface of the string board con necting each pair of marks We like to squirt a small pud dle of glue onto a scrap of paper or cardboard and use one toothpick as an...

Page 3: ...angle will do the job nicely sanding block 10 Install the plastic nut and bridge into the slots provided in the string board No glue required unless they fall out easily These plastic parts are identical but they must be oriented correctly Notice that the string grooves are cut in the plastic at a slope These grooves should slope down toward each end of the string board That way the strings will m...

Page 4: ...ide where to mount the neck use some double side tape to hold the wood in place as you open the lid and drive the screws into the wood You should drill small pilot holes 3 32 drill for the screws to avoid splitting the wood OPEN BOXES CLOSED BOXES Add a strap if you like Mounting screws with cup washers OPTIONS Each cigar box is different Some have clasps to hold the lid shut others don t You can ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands