Issue 4 May 2004
X-80 Integrated Amplifier Page 1 of 8
X-80 Integrated Amplifier Page 8 of 8
X-80 SPECIFICATIONS
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
X-80 Integrated amplifier.
Used properly and carefully, it should give you many years of
outstanding musical reproduction.
Aesthetically, the X-80 Integrated amplifier is a perfect match for the
X-RAY CD player and X-PLORA FM tuner.
Together, they form one of the finest hi-fi systems available.
Dust regularly with a soft cloth or soft brush, but be careful when
using cleaning or polishing agents - they may harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.
X-80
DUAL MONO INTEGRATED AMPLIFIER
Output :
Voltage RMS :
21 Volts 20Hz to 20kHz, one channel loaded
Peak :
59 Volts
Power :
55 Watts one channel into 8 Ohms (17.4dBW)
85 Watts one channel into 4 Ohms
Peak-to-peak output current :
28 Amps
Damping factor :
77
Output devices per channel :
2
Pre-output impedance :
50 Ohms
Line inputs :
Total harmonic dist noise :
< 0
.
02% 20Hz to 20kHz
Signal / noise ratio :
> 93dB ‘A’-weighted
Input sensitivity for 55Watts, 8 Ohms :
175mV
Input impedance :
220k Ohms
Overload margin :
29dB
Channel separation :
> 55dB typical
Frequency response :
20Hz to 20kHz, + 0, - 0
.
4dB
Input facilities :
4 pairs line level RCA connectors
Output facilities :
2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume,
1 pair RCA tape record fixed line level output.
Power requirement :
100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
190 Watts maximum into 8 Ohms, 15 Watts idle.
Dimensions :
218mm, 8.6 inches wide
98mm, 3.8 inches high (including feet)
339mm, 13.4 inches deep
(including knob and rear terminals)
Weight :
6.5 kg, 14.3 lbs unit only, unboxed
8 kg, 17.7 lbs in shipping carton
Standard accessories :
IEC type mains lead (10-Amp), remote control,
2 batteries size LR03 or AAA, manganese alkaline type
Musical Fidelity reserves the right to make improvements which may result in specification
or feature changes without notice.
