background image

Issue 4  May 2004

X-150 Integrated Amplifier             Page 1 of 8

X-150 Integrated Amplifier             Page 8 of 8

X-150  SPECIFICATIONS

INSTRUCTIONS  FOR  USE

Thank you for purchasing the Musical Fidelity

X-150 Integrated amplifier.

Used properly and carefully, it should give you many years of

outstanding musical reproduction.

Aesthetically, the X-150 Integrated amplifier is a

perfect match for the X-RAY Version 3 CD player.

Together, they form one of the finest hi-fi systems available.

Dust regularly with a soft cloth or soft brush, but be careful when

using cleaning or polishing agents - they may harm the surface finish.

If you have any questions about your audio system,

please consult your dealer who is there to help and advise.

X-150

DUAL  MONO  INTEGRATED  AMPLIFIER

Output :

Voltage RMS :

29 Volts  20Hz to 20kHz, one channel loaded

Peak :

82 Volts

Power :

105 Watts one channel into 8 Ohms (20dBW),
141 Watts one channel into 4 Ohms

Peak-to-peak output current :

50 Amps

Damping factor :

80

Output devices per channel :

4

Pre-output impedance :

50 Ohms

Line inputs :

Total harmonic dist noise :

< 0

.

01%  20Hz to 20kHz

Signal / noise ratio :

> 98dB ‘A’-weighted

Input sensitivity for 105Watts, 8 Ohms :

250mV

Input impedance :

220k Ohms

Overload margin :

26dB

Channel separation :

> 70dB typical

Frequency response :

20Hz to 20kHz, + 0, - 0

.

2dB

Phono input :

Frequency response reference
IEC RIAA  -  see graph . . .

Signal / noise ratio :

> 94dB  ‘A’-weighted

Input sensitivity :

2

.

5mV Moving Magnet

Input impedance :

47k Ohms

Overload margin :

24dB

Input facilities :

3 pairs line level RCA connectors,
1 pair phono RCA connectors

Output facilities :

2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume,
1 pair RCA tape record fixed line level output.

Power requirement :

100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
320 Watts maximum into 8 Ohms,  32 Watts idle

Dimensions :

218mm,    8.6 inches wide

98mm,    3.8 inches high (including feet)

377mm,  14.9 inches deep

(including knob and rear terminals)

Weight :

6.5 kg,    14.3 lbs unit only, unboxed

8 kg,    17.7 lbs in shipping carton

Standard accessories :

IEC type mains lead (10-Amp),  remote control,
2 batteries size LR03 or AAA, manganese alkaline type

Musical Fidelity reserves the right to make improvements which

may result in specification or feature changes without notice.

-25

-20

-15

-10

-5

0

5

10

15

20

25

10

16

25

40

63

100

160

250

400

630 1.25K 2K 3.15K 5K

8K 12.5K 20K

FREQUENCY  (Hz)

dB

IEC

RIAA

 

Summary of Contents for X-150

Page 1: ...o 98dB A weighted Input sensitivity for 105Watts 8 Ohms 250mV Input impedance 220k Ohms Overload margin 26dB Channel separation 70dB typical Frequency response 20Hz to 20kHz 0 0 2dB Phono input Frequency response reference IEC RIAA see graph Signal noise ratio 94dB A weighted Input sensitivity 2 5mV Moving Magnet Input impedance 47k Ohms Overload margin 24dB Input facilities 3 pairs line level RCA...

Page 2: ...have been fitted with plastic blanking pieces Removal of these will invalidate any electrical safety approval of this product WARNING Any modifications to this product not expressly approved by Musical Fidelity who is the party responsible for standards compliance could void the user s authority to operate this equipment BEFORE SWITCHING ON Plug the accessory IEC mains lead into the rear panel soc...

Page 3: ...r dealer identify the X 150 Integrated amplifier please quote the serial number located on the rear panel of the unit RADIO FREQUENCY INTERFERENCE R F I This product has been tested to ensure that its operation is not adversely affected by normal back ground levels of R F I and that it does not itself generate excessive amounts of interference However if a problem persists please contact your Musi...

Page 4: ...is action also cancels the mute function If the range of the remote control greatly decreases replace the batteries with new ones Do not mix old and new batteries two are required size LR03 or AAA manganese alka line type Do not dispose of used batteries in a fire CONNECTIONS FACILITIES REMOTE CONTROL Front panel layout 1 POWER on indicator LED blue 2 POWER on off switch 3 Audio MUTE indicator LED...

Reviews: