5
3
Safety instructions
When using the mp-IM1 you must observe the following basic safety
precautions to protect against electric shock, injury and fire.
Read and observe all these hints carefully before putting the electrical
device into operation.
Keep these safety instructions in a safe place.
Only use the electrical equipment in accordance with
the regulations and in accordance with the general
safety and accident prevention regulations.
3.1
Intended use
The mp-IM1 is predominantly an inscription device for polycarbonate
(PC) labels based on inkjet technology.
The possibility of labelling as well as the respective durability and
quality of the inscription with the mp-IM1 can only be guaranteed for
the labelling material along with the special ink, both approved by
Murrplastik.
Only the approved special ink can be used.
The labelling must be carried out using the software approved for the
mp-IM1 and the approved operating systems.
The inscription is possible in black only.
If you have any questions, contact the ACS Helpdesk.
Murrplastik rejects service and claims if the intended use is violated.