eG-05012B page 1 of 2
Description
The eGUARD is a state-of-the-art controller. It will
meet virtually all of your engine-driven equipment
application requirements. The eGUARD has been
designed from the ground up to control today’s elec-
tronic engines using J1939 and can easily control
the traditional non-electronic engines.
The eGUARD can be configured to automatically
or manually operate most types of applications,
from a simple start/stop sequence to complex auto-
matic throttling. Pumps, Compressors, Chippers,
Grinders and Power Units are just a few of the ideal
industrial applications for the eGUARD.
The eGUARD controller can maintain constant
pressure, flow or level by automatically increasing
or decreasing engine speed.
Features
Here are some of the unique features only Murphy’s
eGUARD can offer you at our competitive price.
●
Throttling Input: The eGUARD can be config-
ured to control engine speed using most types of
analog input devices (0-5v, 1-5v or 4-20 mA).
●
Throttling Output: CANbus J1939* or incre-
ment/decrement relay pulse.
*
(when supported by the ECU manufacturer)
●
Compatibility: Accepts Magnetic Pick-up (MPU)
or ECU J1939 speed signals.
●
Field Configurable: Allows password protected
configuration changes through the keypad.
●
Field Programmable: Flash-based microprocessor
allows for easy upgrades or reconfigurations
using a PC or laptop.
●
Sealing: Maintains NEMA4 and IP65 rating when
properly mounted in a rated enclosure.
●
J1939 Ready; Works directly with Murphy’s
J1939-ready PowerView gages, just plug and go,
no sender required.
Standard Components
–
24 - Digital inputs
–
8 - Analog inputs (one battery dedicated)
–
1 - Magnetic pickup input
–
8 - 20A Form “C” relays
–
1 - RS232 port
–
1 - RS485 port
–
1 - RS232/RS485 port
–
1 - J1939 port
–
1 - 64 x 128 pixels full graphic
LCD display with backlight
–
1 - 12-position keypad
Optional Accessories
●
PVA Series Gages (Bulletin: PV-02125B)
●
Remote Relay Board
●
Mimic Annunciator allows for wired remote
operation and monitoring (Call Murphy IPD for
more information)
eG-05012B
Effective 03-05
Catalog Section 40
(00-02-0593)
Digital Auto-Start/Stop/Throttling
Engine Controller
eGUARD Controller
■
Compatible with Electronic (ECU)
and Standard (MPU) engines
■
J1939 Ready – works directly with our
MurphyLink J1939 PowerView gages
■
Automatic Speed Control - throttles
engine speed based on analog inputs
■
Engine Diagnostics – provides most
common descriptive faults when con-
nected to electronic engines
Warranty
A limited warranty on materials and workmanship is
given with this FW Murphy product.
A copy of the warranty may be viewed or printed by
going to www.fwmurphy.com/support/warranty.htm
