Model
：
CH7280SU
／
CH7280LU
Instruction manual
(with warranty card)
◆
Safety precautions
◆
WARNING
Denotes risk of personal injury, loss of life or damage to the tool
In case of failure to follow instructions in this manual.
①
Read instructions carefully prior to operating power tool
. Read and unders tand all section in the
instruction manual
②
Be sure to wear
protective goggles and dust-proof mask
while operating tool
③
Depending on the work environment, ear p lugs, hardhat, safety shoes, and other personal protective
equipment may be required
④
Use only
specified
Adaptor Kit
recommended by Muro for your screwdriver model.
⑤
Use only
specified
"VISROPE STRIPS"
collated screws
⑥
Do not overreach
, ensure proper footing and balance to have control of power tools
⑦
Wear proper clothing
, avoid loose clothes, jewelry or any accessories that may catch onto tool
⑧
Keep workplace clean, tidy and well lit to prevent accident
⑨
Do not
direct power tool towards anybody
at all time
⑩
Do not place
hands, feet and/or head
close to the tip
(screw outlet) of the tool while operating
⑪
Do not operate
tools under
influence of drugs, alcohol or any medication
to prevent serious injury
⑫
Do not use
power tools
near volatile, flammable substances
such as gasoline, thinner, gas, paint, and
adhesive to prevent catching fire or explosion
⑬
Do not expose power tool under rain or wet condition
to prevent risk of electric shock
⑭
Store power tools, accessories and consumable parts outreach of children and untrained personnel
⑮
Grounded tools must be plugged into outlet properly installed accordance with all codes and ordinance
⑯
Handle power tools with care. Dropping or hitting may result in tool malfunction
⑰
Keep these instructions in a safe place for future references
⑱
DO NOT TOUCH ANY METAL PART OF THE TOOL
when driving into walls, floor etc where live electrical
wires may be encountered
⑲
When operating power tool outdoor, use extension cord marked
“
W
”
or
“
WA
”
to
reduce risk of electric
shock.
⑳
Do not use
tool if switch malfunction(on/off) or any misalignment in the tool
◆
Specifications
◆
Model
CH7280SJ
CH7280LJ
Length (without accessories)
Approx.
8-3/4
”
Approx.
9-1/4
”
Weight (without accessories)
Approx.
＊＊＊
Ibs
Approx.
＊＊＊
Ibs
Applicable
screw
Screw Diameter
#10 to #12
#10 to #12
Screw Length
5/8
”
to 3/4
”
1
”
to 1-1/2
”
Screw Head
HEX
（
Partially, specified washer available
）、
FLAT HEAD
（
Partially, specified washer available
）、
WAFER
、
THIN
WASHER HEAD
CH7200
Attachment
CH7280