Muratec MFX-2590 Quick Manual Download Page 83

Page: 83 / 317

2-48 Scanning Documents Using a TWAIN Box

To register or edit the I.D code, press [I.D.Code].

If you do not want to register or edit the I.D. code, proceed to step 10.

Up to 4 characters can be registered.

•

To disable the I.D. code, enter “0000”.

•

Press [Enter].

To continue to change other TWAIN box settings, repeat steps 4 to 10 of the operation.

Importing the Data in a TWAIN Box

You can import the data stored in a TWAIN box using application software that supports

TWAIN.

The procedure for using Microsoft Office Document Scanning is described here as an

example. Since the operation procedure differs according to the application software you

are using, refer to the documentation for the application software for details.

Note

Install the TWAIN driver to the computer in advance. For details on installing the

•

driver, refer to Chapter 2, “Installing to Windows” in the Printer Guide.

You can also connect the computer and the machine with a USB cable to retrieve

•

data.

Start the application software that supports TWAIN on your computer.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands