Muratec MFX-2590 Quick Manual Download Page 71

Page: 71 / 317

2-36 Advanced Scan Features

Select the document category that you want to use.

Edit the document category, as necessary, and press [Enter].

For details on entering characters, refer to Chapter 1, “Entering Characters” in the

•

Administrator’s Guide.
If you do not want to edit it, proceed to step 7.

•

Specify the destination, and press <Start>.

For details on the procedure, refer to “

Scanning to a User

”.

(See page 1-7.)

Setting the Hold Time (Hold Time)

You can set the storage period (hold time) for documents saved in a box.

Note

This function can be used with Scan to Box.

•

You can set a storage period of 1 to 99 days, or unlimited. The day the data is saved

•

is not included in the storage period. This means that if you set a storage period of

one day, the data will be stored until the day after the data was saved.

Load the document, and press <Scan>.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands