Muratec MFX-2590 Quick Manual Download Page 57

Page: 57 / 317

2-22 Advanced Scan Features

Select the color ratio for red, green, and blue, and press [Enter].

Press [Close].

Specify the destination, and press <Start>.

For details on the procedure, refer to “

Basic Scanning

”.

(See page 1-2.)

Editing the Message for Transmission (E-Mail Subject)

When transmitting a scanned image via e-mail, you can edit the body and subject of

the e-mail you’re sending. You can also enter the body of the e-mail using a template

registered in advance.

Note

For details on registering e-mail templates, refer to “

•

Registering / Editing

Templates

”

(see page 7-45)

or “Setting Templates” in Chapter 3 of the OfficeBridge

Guide.

This function can be used with Scan to e-mail.

•

Load the document, and press <Scan>.

Press the [Advanced] tab.

Press [e-mail Subject].

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 57 / 317

Search results

Summary of Contents for MFX-2590

Reviews: