manualshive.com logo in svg

Muratec MFX-2590, Quick Manual, Page: 44 / 317

Share
Download
Muratec MFX-2590 Quick Manual Download Page 44

1

2

Advanced Scan Functions

Advanced Scan Features    2-9

Transmitting to Multiple Destinations (Broadcast)

You can transmit to multiple destinations with a single operation. You do not need to scan 

the document repeatedly for each individual destination.

Note

If you want to transmit to registered destinations, enable the Broadcast function. 

• 

If you want to specify destinations using other methods, you can specify multiple 

destinations even if the Broadcast function is disabled.

You can change the default value to always have broadcast transmission enabled. 

• 

(See page 3-7.)

The number of destinations that can be transmitted to for a single broadcast is 

• 

indicated below.

Destinations

Number

Address book destinations and groups

2000

Manually entered e-mail addresses

30

Shared folders

5

FTP servers

5

User

200

Shared box

1

Load the document, and press <Scan>.

1 

Press the [Advanced] tab.

2 

Press [Broadcast].

3 

Summary of Contents for MFX-2590






























































































































































































































































































































Reviews:

No comments