manualshive.com logo in svg

Muratec MFX-2590, Quick Manual, Page: 31 / 317

Share
Download
Muratec MFX-2590 Quick Manual Download Page 31

1-22    Basic Scan Settings

Press [Resolution].

2 

If [Resolution] is not displayed, press the [Advanced] tab and then select [Resolution].

Select the desired resolution, and press [Enter].

3 

Specify the destination.

4 

For details on the procedure, refer to “

• 

Basic Scanning

”. 

(See page 1-2.)

If you loaded the document in the ADF, this concludes the procedure.

• 

If you loaded the document on the document glass, load the next document, and press  

• 

[Next Doc]. To finish scanning, press [Complete].

Setting the Scan Format

You can set whether to scan the document in color or monochrome.

Load the document, and press <Scan>.

1 

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s 
Guide.

Summary of Contents for MFX-2590






























































































































































































































































































































Reviews:

No comments