Muratec MFX-2590 Quick Manual Download Page 30

Page: 30 / 317

Basic Scan Functions

Basic Scan Settings 1-21

Press [Contrast].

If [Contrast] is not displayed, press the [Advanced] tab and then select [Contrast].

Select the desired contrast, and press [Enter].

Specify the destination, and press <Start>.

For details on the procedure, refer to “

•

Basic Scanning

”.

(See page 1-2.)

If you loaded the document in the ADF, this concludes the procedure.

•

If you loaded the document on the document glass, load the next document, and press

•

[Next Doc]. To finish scanning, press [Complete].

Setting the Resolution

You can set the resolution for scanning. If you set a high resolution, the document will be

scanned clearly, but the size of the created data will be large.

Load the document, and press <Scan>.

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s
Guide.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands