
6-4 Checking the Transmission Result (Transmission Report)
Reading the Transmission Report
1
2
3
4
5
6
7
8
9
10
11
Number
Item
Description
1
Destination
The destination name, fax number, or e-mail address
2
Type
FAX: For fax transmission
IFAX: For Internet Fax transmission
3
Mode
The resolution used for the communication
4
Start Time
The time the communication started
5
Time
The time that elapsed from when the communication started
until when the communication ended
6
Page
The number of pages transmitted
7
Note
The type of communication is printed for the following types of
communication:
• Manual Tx
• Polling Tx
• F-Code Tx
• Broadcast Tx
• PC-Fax Tx
• PC-Fax F-code Tx
• Archive Tx
• Rerouted Fax Tx
8
Result
OK: Completed normally
*: ECM Mode transmission
#: Super G3 transmission
Code: The communication error code
*1
9
Details
Blank when the communication ends without an error
When a communication error occurs, the error message is
printed
*1
10
Sender
The user name (only when a user is logged in)
11
−
The date and time the report was printed
When a communication error code and error message is printed, confirm the content of the
*1
error and perform the transmission again. For details, refer to Chapter 4, “Error Messages” in
the Administrator’s Guide.