Muratec MFX-2590 Quick Manual Download Page 241

Page: 241 / 317

5-14 Specifying Destinations

Selecting From the History

Selecting From the Dial History (Redial)

When transmitting a fax, you can select a destination from the history of the last 10

destinations entered using the numeric keys. You can also edit the selected history before

using it as a destination.

Note

Transmission using destinations registered in the address book are not displayed in

the dial history.

Press <Fax>.

Press the [Address Book] tab or the [Num. keys] tab.

Press [Redial].

If [Redial] is not displayed, press the [Advanced] tab and then select [Redial].

Select the destination you want to specify.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 241 / 317

Search results

Summary of Contents for MFX-2590

Reviews: