Muratec MFX-2590 Quick Manual Download Page 223

Page: 223 / 317

4-76 Useful Internet Fax Functions

Selecting the File Format (File Format)

Select the file format for saving the file. You can use the following three file formats.

TIFF-S: The simple mode TIFF format.

Documents are all converted to A4 size, 200 dpi for transmission.
When the destination machine cannot receive TIFF files, use this file format.

TIFF:

The full mode TIFF format.
Documents are transmitted with the document size and resolution set when scanning.

PDF:

The PDF format.
Documents can be sent in this format when the destination is a computer or this product.

Load the document, and press <Fax>.

Press the [Advanced] tab.

Press [File Format].

Select the file format, and press [Enter].

Specify the destination, and press <Start>.

For details on specifying the destination, refer to “

Specifying Destinations

”.

(See page 5-2.)

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands