Muratec MFX-2590 Quick Manual Download Page 167

Page: 167 / 317

4-20 Various Fax Functions

Enter the transmission date.

You can use the numeric keys.

Select [AM] or [PM], press the entry box and enter the transmission time.

Enter the time in the entry box in the 12 hour format.

•

You can use the numeric keys..

•

Press [Enter].

Specify the destination, and press <Start>.

For details on specifying the destination, refer to “

Specifying Destinations

”.

(See page 5-2.)

Note

After scanning the document, you can check or delete the reserved transmission by

•

pressing <Job Confirm.



Fax Cancel>.

(See page 3-28.)

To change the specified time after scheduling the transmission, you need to delete

•

the scheduled transmission and then set it again.

Transmitting Faxes to a Fax Server (E-mail Gateway)

You can transmit to a fax server as if you were transmitting to a regular telephone line.

The e-mail gateway settings need to be registered in advance.

For details on registering an e-mail gateway, refer to Chapter 2, “Specifying the Network

Settings” in the Administrator’s Guide.

Note

This function cannot be used in the following cases:

Real time transmission

•

Polling reception.

•

F-Code transmission

•

Closed transmission

•

ID check transmission

•

Load the document, and press <Fax>.

Press the [Advanced] tab.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands