Muratec MFX-2590 Quick Manual Download Page 119

Page: 119 / 317

3-34 Basic Faxing

Setting the Reception Method

In addition to setting the reception mode, you can also set manual reception or automatic

reception on the screen.

•

Auto reception:

This method automatically receives faxes. For details, refer to “

Auto Reception

for Fax Only (Fax Ready)

”.

(See page 3-31.)

•

Manual reception:This method receives faxes after <Start> is pressed. For details, refer to

“

Primarily Using the Phone (Tel Ready)

”.

(See page 3-33.)

Press <Fax>.

Press the [Advanced] tab.

Press [Auto Rx].

Select [ON] or [OFF] , and press [Enter].

Select [ON] to set automatic reception or [OFF] to set manual reception.

Operations During Reception

The information lamp on the control panel flashes during reception. When out-of-memory

reception is performed, the information lamp is illuminated.

Information lamp

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands