Muratec MFX-2550 Guide, User Manual, Page: 300 / 327

1
2
3
4
5
6
7
Device Settings
Registering Destinations 7-35
„
Specifying the Network Settings
The following items are set when installing the Scan to Print Monitor, but can be changed
as necessary.
Item Description
IP Address Set the IP address of the machine.
HTTP Port No. This setting is enabled when “Perform secure communications” is
deselected.
Set the HTTP port number set in OfficeBridge.
This is normally set to “80”.
HTTPS Port No. This setting is enabled when “Perform secure communications” is
selected.
Set the HTTPS port number set in OfficeBridge.
This is normally set to “433”.
Perform secure
communications Select this to perform SSL communications.
Right-click the task tray icon of the Scan to Print Monitor, and select
1
“Configuration”.
Select the [Network Settings] tab.
2
To change the IP address of the machine, enter the IP address.
3
Click [Search] to automatically search for copiers on the network and select the MFP to use.
Select the IP address of this machine from the search results, and click [OK].
Edit the HTTPS port and HTTP port numbers.
4
To edit the HTTP port number, deselect “Perform secure communications” first. •
To edit the HTTPS port number, select “Perform secure communications” first. •
Click [OK].
5