Muratec MFX-2550 Guide User Manual Download

Page: 19 / 327

1-10 Basic Scanning

Scanning to USB Memory

You can save a scanned document to USB memory connected to the machine.

USB memory

Note

Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.

•

USB memory with a security function, memory card readers connected via USB,

•

USB memory via an extension cable and USB hub, and USB memory that does not

meet the USB standards, are all unsupported.

If the USB memory becomes full while the data is being saved, the data that is

•

being written is all deleted. Therefore, make sure that the USB memory has enough

free space in advance.

If you want to connect the USB memory via an extension cable, use a cable that is

•

shorter than 3 meters.

Load the document, and press <Scan>.

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s

•

Guide.
Set the document type, contrast, and resolution as necessary.

•

(See page 1-20.)

Press the [PC/USB] tab, and then [USB].

Summary of Contents for MFX-2550 Guide








































































































































































































































































































































Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands

Muratec MFX-2550 Guide, User Manual

Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands