Muratec M F X - 5 5 5 5, User Manual

Page: 83 / 122

82 _ Maintenance
3. Wipe the surface of the scanner glass and DADF glass until it is clean
and dry.
4. Wipe the underside of the scanner lid and white sheet until it is clean
and dry.
5. Close the scanner lid.
MAINTAINING THE TONER CARTRIDGE
Toner cartridge storage
Toner cartridges contain components that are sensitive to light,
temperature, and humidity.
Muratec suggests users follow the
recommendations to ensure the optimum performance, highest quality, and
longest life from your new
Muratec toner cartridge.
Store this cartridge in the same environment as the printer it will be used in;
this should be in controlled office temperature and humidity conditions. The
toner cartridge should remain in its original, unopened package until
installation – If original packaging is not available, cover the top opening of
the cartridge with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful
shelf and operating life. Do not store on the floor. If the toner cartridge is
removed from the printer, always store the cartridge:
• Inside the protective bag from the original package
• Correct side up in a horizontal position (not standing on end)
• Do not store consumables in;
- Temperature greater than 40°C (104°F).
- Humidity range less than 20% and not greater than 80%.
- An environment with extreme changes in humidity or temperature.
- Direct sunlight or room light.
- Dusty places.
- A car for a long period of time.
- An environment where corrosive gases are present.
- An environment with salty air.
Handling instructions
• Do not touch the surface of the photosensitive drum in the cartridge.
• Do not expose the cartridge to unnecessary vibrations or shock.
• Never manually rotate the drum, especially in the reverse direction; this
can cause internal damage and toner spillage.
Use of non- Muratec and refilled toner cartridge
Muratec does not recommend or approve the use of non- Muratec
brand toner cartridges in your printer including generic, store
brand, refilled, or remanufactured toner cartridges.
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the
amount of toner that print jobs require. The actual print-out number may
vary depending on the print density of the pages you print on, operating
environment, printing interval, media type, and/or media size. For example,
if you print a lot of graphics, the consumption of the toner is high and you
may need to change the cartridge more often.
Replacing the toner cartridge
When the toner cartridge is completely empty:
•
Toner is empty. Replace toner cartridg appears on the display.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced.Check the type of the
toner cartridge for your machine. (See "Supplies" on page 107.)
1. Open the side cover.
2. Open the front cover.
1 white sheet
2 DADF glass
3 scanner lid
4 scanner glass
• Muratec ’s printer warranty does not cover damage to the
machine caused by the use of a refilled, remanufactured, or non-
Muratec brand toner cartridge.