© Munters AB, 2018
27
6.1.3
R
ESPONDING TO AN AUDIO ALARM MESSAGE
The Voice Dial Out service transmits audio alarm message, via telephony, from Communicator to the
contacts entered in the Address Book (page 22). This section details the procedure to follow when an
audio alarm is received.
NOTE:
This service is provided by the Communicator ONLY if the Address book is properly defined
with contacts and the "VOICE" service selected per contact.
CAUTION
Communicator only broadcasts its alarm message AFTER someone speaks into the phone.
Any word or sound is sufficient.
The following illustrates the sequence of ALARM messages:
"Good <Morning / Afternoon / Evening> farm <#> active alarm.
Please, press 1 to listen."
"House <#> has <#> alarm message<s>."
•
Alarm messages for the first house are played and then the following options are available:
Acknowledge
Replay house
message
Play next
house message
End call
•
Enter password (if acknowledging for the first time this call) and press
.
•
"Please wait… Reset for house
<#>
successful.
<Next Message / Goodbye>
."
•
Right after "Please wait" is heard, press
to access the ALARM OPTIONS MENU.
"Entering alarm options for House <#>"
•
System reports alarm and then offers the following options:
NOTE:
Disabling alarms disables them until 12:00 PM the following day.
•
"Disable
<confirmed / failed>
!" message is repeated and returns to House Alarm Messages
NOTE:
If at any time an incorrect key is pressed or if nothing is pressed, the system repeats itself three
times and then ends the call.
NOTE:
To change the number of times that Communicator retries to contact a recipient, refer to
Message Options, page 33.
1
9
0
1
Replay alarm
message
0
1
9
Return to house
messages
Next alarm
message
Disable
