Munters HCUw, Operating & Maintenance

Page: 26 / 122

24
OPTIONAL WARRANTY
Munters warrants the desiccant wheel to be free of defects in material and workmanship for a period of up
to five years from the purchase date.
The foregoing does not apply to:
=
1. Lithium Chloride wheels that have not been maintained under a Munters Service Agreement
continuously throughout the five-year period;
2. Damage caused by misuse or any improper maintenance or contamination of the Honeycombe
wheel media; or
3. Damage caused by other component malfunction or operation of the equipment beyond the
specified conditions
=
Should this desiccant wheel be found to be defective due to material or workmanship within the specified
warranty period, Munters shall repair or replace the desiccant wheel at its option.
If the wheel is determined to be defective and not repairable, the wheel will be replaced, and a credit will
be applied toward the cost to replace the desiccant wheel, per the prorated schedule below. The
replacement costs do not include freight or labor to remove or reinstall the wheel.
The original equipment invoice date establishes the purchase date which will be used to calculate the
prorated replacement cost.
This warranty is not transferable and does not cover normal wear and tear or damage caused by
improper use. The warranty is also voided if the purchaser modifies the desiccant wheel or original
equipment in any way.
=
=========mêçê~íÉÇ=pÅÜÉÇìäÉ=
=
= = == ==vÉ~ê== = ============== ====mÉêÅÉåí=`êÉÇáí=
N NMMB=
O UMB=
P SMB=
Q QMB=
R OMB= = = = =
= = = = = =
STEAM REACTIVATED SYSTEMS: Munters will only repair or replace leaking steam coils under
warranty when accompanied by a water quality report from an independent, qualified laboratory showing
the chemical analysis of the steam associated with these coils. These tests must show pH values and
sulfur content within the ranges associated with proper steam operating ranges. Proper steam piping, per
manufacturer’s recommendations, must be applied to any steam coil installations to prevent
contamination and possible water hammering that could lead to leaks.
LABOR WARRANTY
Munters’ obligation under this warranty for labor is limited to correcting any improperly performed start-up
labor, for a period of ninety (90) days. Customer is responsible for providing clear access to equipment.
CLAIM PROCEDURES
If any defect appears in the equipment during the applicable warranty period:
1. Buyer shall notify Munters of the defect in writing, including in such written notice the model,
serial number and part number of such equipment or defective part thereof, and a description of
the nature of the defect.
2. After receipt of such information, Munters will ship a replacement, F.O.B. Munters factory, and will