mundoclima H11 Series, Service Manual

Page: 58 / 73

10.3.3.8 Low pressure protection (ODU P2/PC 31) (For MUEX-36-H11.4 , MUEX-42-H11.5 )
Low pressure protectio
Low pressure protection
Whether the w iring
between the low pressure
protector and main control
board is connected well or
correctly
Whether the wiring
between the low pressure
protector and main control
board is connected well or
correctly
Method: Disconnect the plug.
Measure the resistance of the
low pressure protector. If the
protector is normal the value is
o
Method: Disconnect the plug.
Measure the resistance of the
low pressure protector. If the
protector is normal the value is
o
Yes
Yes
Connect it well
Connect it well
Replace outdoor main board
Replace outdoor main board
No
Replace low pressure protector
Rep lace low pressure protector
No
Whether the low
pressure protector
is broken
Whether the low
pressure protector
is broken
heck whether the outdoor
ambient temperature is too
low
Check whether the outdoor
ambient temperature is too
low
No
Stop the unit
Stop the unit Yes
pen fu f f lly valve core of
high pressure valve
Open fully valve core of
high pressure valve
No
Check whether valve core
of high p ressure valve is
opened
Check whether valve core
of high p ressure valve is
opened
Check if the indoor fa f f n runs
proper ly in cooling mode
Check if the indoor fan runs
properly in cooling mode
p lease refe f f r to the so lution of fa f f n
speed has been out of control
malfunction. Find out the cause and
have it solved.
please refer to the solution of fan
speed has been out of control
malfunction. Find out the cause and
have it so lved.
No
Yes
Yes
No
Check whether the refrigerant
system is ok
Check whether the refrigerant
system is ok
Refrigerant is not enough add the
refrigerant
Refrigerant is not enough add the
refrigerant
No
Service manual
MUEX-
H11 series
57