Mini Blender
MK0057 REV 1
B
C
D
E
F
A
Lid
B
Button
C
Blade pin
D
Blade
E
Bowl
F
Base
Before You Use Your Mini Blender:
Read all instructions and keep for future reference. Wash the lid, bowl and blade in warm soapy water. Do not
immerse the motor unit in water. If the base needs to be cleaned, wipe it down with a damp cloth. Do not use
abrasive cleaning implements as this can scratch the plastic of the bowl. Dry all parts thoroughly.
To Use:
1.
Ensure the surface you are using is clean, dry and level.
2.
Place the bowl onto the base. Align the notches on the base of the bowl with the groove on the base unit.
The bowl can be secured or released by following the directions and arrows on the base unit.
3.
Place the blade onto the blade pin.
4.
Put the ingredients inside the bowl.
5.
Place the lid onto the bowl. If the lid is not fitted correctly then the Mini Blender will not operate.
When in place the arrows will be aligned and the lid will have clicked into place.
6.
Plug the unit into the mains.
7.
Press down on the button at the top of the base unit to start blending. When you take the pressure off the
button, this will stop blending. It may take a couple of seconds for the blade to stop completely.
8.
Important: This Mini Blender is designed for a maximum running time of 40 seconds on followed by a
minimum of 40 seconds off. Do not repeat this cycle for more than 3 minutes without a rest time of 3 minutes.
9.
When you have blended contents as required, unplug from the mains and wait for the blade to stop completely
before removing the lid.
10.
Remove the lid and blade (scraping off any food left on the blade into the bowl).
11.
Remove the contents of the bowl.
To Clean:
The bowl and lid can be hand washed in warm soapy water, or in the top rack of the dishwasher up to a temperature
of 75°C.
DO NOT
place in the lower rack. Wipe the base unit with a damp cloth if required.
DO NOT IMMERSE THE
BASE UNIT IN WATER.
Dry all parts thoroughly before use.
Important:
• Read all instructions carefully before using the Mini Blender. Retain instructions for future reference.
• All parts of the unit are
NOT
suitable for steam or microwave sterilisation.
• Do not immerse any electrical parts in water as this could result in electric shock.
• Close supervison is necessary when this appliance is used around children.
• Ensure the unit is unplugged when not in use and before dismantling or assembling the appliance.
IMPORTANT! KEEP FOR FUTURE REFERENCE
A
CCD-0067-000 REV-11262-IB01-1
