Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
Baby In-Sight
®
63010
Back Seat Head Restraint
• Raise head restraint.
• Insert clamp underneath head restraint.
• Wrap adjustable stand over top of head restraint.
• Bend clamp upward to conform to head restraint.
• Attach strap’s clip to D-Ring.
• Lower head restraint down to secure in place.
• Tighten strap and rotate mirror to desired angle so your child is visible to driver
in vehicle’s rear-view mirror.
IMPORTANT SAFETY PRECAUTIONS:
Keep mirror out of baby’s reach and direct sunlight. Always carefully follow car seat
manufacturer’s directions for correct installation and position of a child safety seat.
If the tether anchor is being used to secure a child safety seat, do not use this
attachment method.
D-Ring
Clip
Strap
Adjustable
Stand
Clamp
Tether Anchor
Adjustable Stand
Fastener
Clip
Tether
Anchor
Clamp
IMPORTANT:
Do not attach this product to your vehicle’s tether anchor if your child
safety seat is installed in your vehicle using this anchor.
• Position mirror on back seat in front of tether anchor.
• Insert clamp between seat and rear deck of your vehicle.
• Bend clamp to conform to seat shape.
• Attach clip to tether anchor and tighten strap.
• Unfasten adjustable stand’s fastener, and tilt mirror to desired angle so your child
is visible to driver in the vehicle’s rear-view mirror.
NOTE:
The tether anchor attachment method is designed for sedan vehicles. If you own a
mini-van, station wagon or sport utility vehicle (SUV) and would like to use the
tether anchor attachment, you may need a tether extender. Please visit BRICA® at
brica.com or call 1.866.869.8257
Center Back Seat with Deck
Adjustable
Stand
Fastener
Back Seat
Rear Deck
Clamp
• Position mirror on center front side of back seat.
• Bend the clamp to conform to the top of back seat.
• Insert clamp between seat back and rear deck.
• Adjust as needed so clamp is secure.
• Unfasten adjustable stand’s fastener, and tilt mirror to
desired angle so your child is visible to driver in vehicle’s
rear-view mirror.
